Відео

Yeah you'll just have to be careful you've enough room to move stuff about, just be careful and take your time. Also make sure you buy the right version and model of triggers

Yeah they're amazing cars, mines still in Spain as far as I'm aware. Did you get the e220 or 250?

It's been a long time since I messed with a PS4 Dualshock controller but what I remember, to put it into remap mode you held you finger up against the back to put it into remap mode, I cut the foil off mine to stop this and just used the manual mode

@@CraigsChannel thanks for the fast response! I only want manual mode so I cut the foil & wire off on installation & it still happens! Any ideas? You said it's been a while so no worries if not. I appreciate the reply either way!

Did you cut all the foil off or just a small portion?

@@CraigsChannel i believe i cut the wire & foil off completely. i might have to open the controller up to double check

I would, for the sake of 10mins of your time it'll be worth it. Like I say just make sure it's totally cut off, it's a horrible idea in the first place, manual was so much better

Should be around 62.5nm, my torque wrench isn't very accurate so just go by hand. I've never had an issue yet and tbh you'd know if the steering wheel was getting loose before it fell off lol

Yeah the trigger still work as normal, unless you're adding digital triggers

@@CraigsChannel thank you

If you play games like Fifa and Gran Turismo you don't need digital triggers but if you play CoD they help

You're hands develop muscle memory to any back buttons or controllers you use 👍

Yeah R3 and L3 requires soldering. You can change the button layout in most games so you could change what ever R3 is to something else

I suffer pretty bad anxiety unfortunately, some times my hands are ok then other times they shake like a 100 year old man 😂

@@CraigsChannel 😂😂

@@CraigsChannel have u had any problems or still use the kit to this day just wanted to know a head of time so i know whats to come

Yeah still using the back buttons loads of my friends have the kit also. Tbh I can't play without it and the quality is really good

Also when i hold it down for 5 seconds it blinks and does not stay on

Never mind I fixed it

I'm really not sure? Maybe it was an optional extra or something, it happens on some cars

@@CraigsChannel that’s the only one ever ever seen with that. I actually prefer it. It’s more streamlined without the exposed cup holders

This was my friends car, he just said with him selling it could I make a video for the new potential owner. The guy said he watched the video and was sold! It was really ahead of it's time for tech, but it's a little dated now. It was terrible on fuel as you'd imagine 😂

@@CraigsChannel yeah AMGs they’re all terrible. I had an SL65 it was terrible on gas too .

Thanks man, appreciate it. They've changed the models since I did this one so just make sure you've got the right one ad there's a BDM-010 020 030 and 040 now

@@CraigsChannel ok man I will know

Hi, yeah you can remap L3 or R3, but you'll need to do a tiny bit soldering. Personally I only used O and X, for jump and crouch when playing CoD. You could just swap your button layout round if you don't wish to solder

Yeah you can do them together, but what I normally say to people is do one at a time. Reason being, if something doesn't work, you know which one to fix, if you fit them together you might not know which ones at fault. Totally your call though, that's just how I usually do it

Hi, you might have a BDM-030. Did you buy the kit on Amazon? If you did have a flick through their photos, they show you how to tell which model you have by pressing down R2 or L2

@@CraigsChannel yeah just checked the motherboard it's a 30! Have ordered the right kit now tt

It's so annoying Sony keep changing stuff, if only they'd fix the stick drift issue! Glad you've figured out which version you've got, I thought that would he the issue. I've been meaning to make a video on the BDM-030 back buttons install and the clicky triggers. The back buttons on the 30 is a lot easier than the 10 and 20

@@CraigsChannel thanks for your response mate much appreciated, any recommendations for 30 installation video?

Extremerate have one on their channel, I'll try my hardest to make one but you'll have installed it by the time I make it 😂

Thanks for watching 😁

I'm pretty sure they'll have just been the standard rims, my friend who owned it never changed anything apart from spraying them black. They've actually gone up in value since he sold his, nice drive but terrible on fuel as you'd imagine being a 6.2 litre 😂

Do you have a BDM-030 or 040

Are you using a different controller? The version of your kit might not be compatible with the controller

@@CraigsChannel definitely all the same! Just had to clean out a bit of debris, only thing I haven’t checked is the cable going into the paddles (opened it without disassembling paddles bc it’s a nightmare) Other than that I’ll probably have to see if I can get a couple replacement ribbon cables shipped to the UK lol. Appreciate the reply though!

Oh I thought you meant your controller had drift so you got a new one! Drift is an absolute nightmare on these, I've had to open a few and clean inside the potentiometer things, or even worse replace them. I'd just double and triple check one of them cables isn't the wrong way... you think that's the issue and personally so do I

Best way to check now is by pressing L2 or R2, if you pop on Amazon extremerate show you the difference to see which version you have 👍

No unfortunately you can only map one button per map, so only O or X on their own

@@CraigsChannelwait I don’t get it do you can’t map it to anything but circle and x?

@@CraigsChannel like let’s say I want to map circle and x to the back buttons or triangle and square will it work?

You can map any button, you just can't have 2 buttons to one paddel

@@CraigsChannel ohhh ok thanks man your a big help

Is that the centre ones? Like the ones on that back piece of plastic. Maybe pop the cover off and check they're lined up properly. I know you don't get the same kind of click from k1 k2 as you do them, k1 and k2 are a really solid click

Diesel engines never really sound good, they're always noisey, sound like tractors 😂 good on fuel though compared to say a petrol

@@CraigsChannel i had e 250 cdi and 220 cdi both coupe and everything was superb ( 5.1 liter on highway 140 km/ h ) but sound of engine when i stop was terrible. Benz is great but next one must be V6 gasoline. On audi A5 coupe tdi engine i dont hear it at all but everything else was better on Benz.

If you have a quick look through my videos you'll see my friends CLS63 what I did a video on 6.2 V8 sounded amazing but terrible on fuel here in the UK around 12mpg

I'm really not sure on that one, if you look on a video and zoom in to see if they look a similar fit. My friend lives in the US, he tried the Tomsin stuff and likes it all, maybe all the manufacturers use a similar mold

@@CraigsChannel thank you so much I appreciate the fast reply I’m definitely gonna buy them and try it out lol 😭💯

Thank you for coming to the channel. You'll have to let me know if they fit or not! There's a good chance they will, but you'd only know by testing. I'm still in two minds if I should buy the Edge, or if its a waste of money

@@CraigsChannel I feel that brotha I want to buy the Edge as well tbh but also don’t know if it’s worth it tbh but I think after a lot of research it’s worth it cause you can swap the sticks after stick drift and you get adjustable triggers and the 2 back paddles only reason I haven’t got it yet is because the 2 back paddles tbh I kinda want 4

@@CraigsChannel and I also tried to put the clicky triggers on but wasted good time because I had the wrong controller even tho I thought it was a 020 it was a 030 smh but I did have a 020 to try it on after a long struggle I got the triggers on but now the L2 and L1 don’t work I’m not too sure why some folks say to try the old ribbon cables for the triggers instead of the one that comes in the kit, and I didn’t get to try the tomsin paddles since I struggled so much with the triggers smh 🤦🏾‍♂️ I’ll try again on Saturday as that is my other day off I wasted my day off today lol but I just look at it as a lesson learned trial and error 💯

Thanks for the support, I'd love to post more but think I've done all the mod kits now! Only thing I can think is the BDM-030 controller with some back buttons

@@CraigsChannel I understand maybe post about other tech related stuff ? I’ll continue to support and watch 💯

Thank you for watching 😎😁

The microphone?

@@CraigsChannel yes

@@CraigsChannel i just found the part and ordered it, shipping will be around 2 days. Can i still instal the backbuttonkit, put the controller back together and use it until the mic flex cable arrives?

@@CraigsChannel or would you advise me to wait until the part arrives and intall and put back together the controller then?

Tbh I don't really know anybody who uses the built in mic, if you have a headset just leave it off

If they aren't on Amazon they'll be on extremerates offical website 😁

@@CraigsChannelwhat about ps5 slim carbon fiber plates? Do they exist from extremerates? Because i looked on their website and saw nothing about any ps5 plates as a whole :(

Sorry for the late reply didn't even see this. I'm not sure if they've done plates for the slim model yet, I'm sure they will though!

@@CraigsChannel i really hope they will! The slim’s been out for a while i think so i’m kinda losing my hope :(

They've got a newer kit out now, does the same job just it's for the newer version/model controller. Guessing you had a BDM-010 or 020

Personally I'd go for digital triggers, if it's games like CoD you play

@@CraigsChannel I play rocket league. I just need two back buttons and not the triggers. 4 back buttons is overkill. This is the best feeling back attachment on dualshock 4 and dualshock 4 is the most accurate controller on rocket league so that’s why I use it, having used about every controller there is.

Ah got ya, thought you were wanting digital triggers. I agree 4 is overkill, I only use 2 buttons, always have

You'll need to check you're version, if you go on Amazon extremerate have a photo showing you how to tell which one you have by pressing L2 or R2 down. There's a BDM-010, 020, 030 and 040. This one in the video is for the 010 and 020

Is that to do with Model CFI ZCT1W ? Because that’s what it says on my controller .

Mine has a small B next to it when yours in the video has an A

Like I say if you pop on Amazon they've got a photo of all 4 versions next to each other, pressing L2 or R2 if the best way. Some have different gaps or you can see the spring. You'll really need to work out which one you have. If it's been bought in the past year I'd guess BDM-030

Right good news the controller is working all buttons are working . The red light is on . But some reason I’m struggling to get my r3 and my x button to go on my 2 padals at the back . Can I have some help if possible please

Your controller will be a BDM-030 or 040. This kits for the 010 and 020

Where did you order from? If Amazon speak to them online or request a refund

Is everything working now? Its been a long time since I messed with a Dualshock 4, with me having a PS5 it's the Dualsense. I've removed the rumbles on a few controllers as I never used them and it saved weight

@@CraigsChannel yeah it all fits now. though i still can't tighten the screws too much. but its snug enough. i wanna try for a dualsense, i've gotten a couple. but i'll wait on that.

So if you dont solder can you just remap the circle,triangle,square, x and the d pad

Yeah the soldering is only needed IF you want say L3 or R3 as a back button. It works regardless on the main buttons. I just use L3 and zr3 normally and X O as back buttons

Thanks craig 😅

More than welcome. Just double check you get the right version kit as there's 4 different controllers now BDM-010, 020, 030 and 040

Did you exit remap mode?

The back buttons? Have you seated them into the back properly with the metal bars

I put them on but they just sit flat and don’t press down

It may be a thing with the screws putting the thing that holds them on but I used the biggest ones

@@CraigsChannel they just lay flat and don’t press down I put the bar in right

It should be the skinny long ones that hold the back board. Does the board move or is it solid?

I'm not even sure what a dual stage or triple air bag is? You just use the one that came with the car, that's the only part you aren't replacing

Have you held the remap button on the back for about 6 seconds until its a solid light? Then remapped your buttons to make it flash, then hold the button for 6 seconds to exit remap mode

The only other option is a Scuf £230 or the Dualsense Edge at £209, this is the cheapest alternative I think unfortunately